Remote I/O Systems

  • FB Zone 1
  • RPI Zone 2
  • LB Zone 2

FB Zone 1

News image

Overview FB Remote I/O for Zone 1/Class I, Div. 2 FB Remote I/O stations are mounted in hazardous areas Zone 1 or Zone 21 respectively Class I, Div. 2. They...

READMORE

RPI Zone 2

News image

Overview Remote process interface for the control room and Zone 2 The remote process interface is the modular system which enables you to connect your field signals of the...

READMORE

LB Zone 2

News image

        Overview LB Remote I/O for the safe area and Zone 2/Class I, Div. 2 LB remote I/O stations are mounted in hazardous areas Zone 2/Class I, Div. 2 or Zone...

READMORE
Overview

FB Remote I/O for Zone 1/Class I, Div. 2

FB Remote I/O stations are mounted in hazardous areas Zone 1 or Zone 21 respectively Class I, Div. 2. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. FB Remote I/O connects your conventional sensors and actuators to your DCS using a single standardized fieldbus connection (Profibus, Modbus and several other).

The plug-in input and output modules can be hot swapped in a running system without the need for a hot work permit.

There is a wide spectrum of single and multi-channel I/O modules available offering intrinsically safe and increased safety field connections. This ensures that engineering becomes easy and adaptable to the needs of your plant concept.

  • Mounting / maintenance without hot work permit
  • I/O-Modules for Ex-i (IS) and Ex-e field connections
  • I/O Modules can be mounted on the backplane in any order
  • 1 - 8 channel I/O modules
  • Standard Busses (Profibus, Modbus, ...)
  • Configuration can be accomplished via the bus
  • HART-Communication available
  • Optional redundancy for bus and power supply
  • Supports the FDT concept
  • Bus independant SIL 2 shut down outputs available
  • FATs and GAMP4 FATs optional
 
 
Useful Links Training Request For Jobseekers Submit Inquiry