LB Zone 2

Home

PEPPERL+FUCHS

Remote I/O Systems

LB Zone 2

Remote I/O Systems

FB Zone 1
RPI Zone 2
LB Zone 2

FB Zone 1

Overview FB Remote I/O for Zone 1/Class I, Div. 2 FB Remote I/O stations are mounted in hazardous areas Zone 1 or Zone 21 respectively� Class I, Div. 2.� They...

� Overview Remote process interface for the control room and Zone 2 The remote process interface is the modular system which enables you to connect your field signals of the...

Overview LB Remote I/O for the safe area and Zone 2/Class I, Div. 2 LB remote I/O stations are mounted in hazardous areas Zone 2/Class I, Div. 2� or Zone...

LB Remote I/O for the safe area and Zone 2/Class I, Div. 2

LB remote I/O stations are mounted in hazardous areas Zone 2/Class I, Div. 2 or Zone 22 or in the safe area. They form a modular signal conditioning system to interface signals from the field with a control system in the safe area. LB remote I/O connects your conventional sensors and actuators to your DCS using a single standardized fieldbus connection (PROFIBUS, Modbus and several more).
The plug-in input and output modules can be hot swapped in a running system without the need for a hot work permit.

There is a wide spectrum of single and multi channel I/O modules available offering intrinsically safe and increased safety field connections. This ensures that engineering is easy and adaptable to the needs of your plant concept.

Mounting / maintenance without hot work permit
I/O-modules for Ex i (IS) and Ex e field connections
I/O modules can be mounted on the backplane in any order
1 - 8 channel I/O modules
Standard buses (PROFIBUS, Modbus, ...)
Configuration can be accomplished via the bus
HART-communication available
Optional redundancy for bus and power supply
Supports the FDT concept
Bus independent SIL 2 shut down outputs available
FATs and GAMP4 FATs optional

Remote I/O Systems

FB Zone 1

RPI Zone 2

LB Zone 2

Overview

LB Remote I/O for the safe area and Zone 2/Class I, Div. 2