Home PEPPERL+FUCHS Separator Alarm Systems Alarm System for Tanks

Separator Alarm Systems

  • Standard Alarm System
  • Standard Alarm System as Set
  • Alarm System with SMS Alarms
  • Alarm System for Tanks
  • Alarm System for Fat Separators
  • Accessories

Standard Alarm System

News image

OverviewStandard alarm systems transmit the alarms acoustically, visually and via potential-free relay contacts. These alarm systems consist of the following modules:

READMORE

Standard Alarm System as Set

News image

OverviewTo simplify ordering and installation we provide alarm systems as complete sets. The alarm system sets consist of the following components: Sensors Control unit Housing for control unit Assembly accessoriesBelow...

READMORE

Alarm System with SMS Alarms

News image

OverviewThe alarm system with SMS alarms is an efficient solution for monitoring oil and petrol separators. It is suitable for all applications where no efficient monitoring was possible for technical...

READMORE

Alarm System for Tanks

News image

Overview The NV05-11 intrinsically safe alarm system for monitoring containers and tanks, has connections for four different types of sensor inputs: NVF sensors monitor overflow of light liquids in tanks...

READMORE

Alarm System for Fat Separators

News image

Overview Alarm System for Fat Separators The NVD-11 alarm system for fat separators monitors fat or grease layer thickness. The alarm system signals when the maximum level of a fat...

READMORE

Accessories

News image

The accessories below are used to install an alarm system for oil separators. Connection box for sensor cables NVO5-VD Connection box For connection of 2 sensor cables ATEX...

READMORE

Overview

The NV05-11 intrinsically safe alarm system for monitoring containers and tanks, has connections for four different types of sensor inputs:
  • NVF sensors monitor overflow of light liquids in tanks by distinguishing between air and liquid.  They are approved for installations in hazardous areas up to zone 0
  • KVF-103-PF monitors oil layer thickness by distinguishing between air and water and oil and water.  They are approved for installations in hazardous areas up to zone 0
  • Circuit amplifier on/off pressure sensors monitor double wall pipelines in hazardous areas up to zone 1
  • Namur sensors

The alarm system is easily mounted on a DIN rail and features conveniently located DIP switches that allow for field configurations.

The NV05-11 has LEDs to display the actual operation mode and a built in acoustic warning alarm.  Furthermore, there are 2 independent potential-free changeover contacts that can be connected to an external remote alarm or to a central monitoring system.

 

 
 
Useful Links Training Request For Jobseekers Submit Inquiry